Cheville Parquet

General information

Parquet is usually a tricky, expensive flooring option.
The concept for Cheville stemmed from a desire to take the tricky and turn it into something simple. And here's why..

1. Its engineered - Because they are engineered, all of our parquet blocks can be laid direct on top of an underlay, this is especially important for the homeowner wanting to reduce noise below if living in an apartment. They are also suitable over under floor heating.

2. Its Pre-finished - Usually parquet requires sanding and sealing after installation, our floors are expertly hand finished before they are despatched, so installation is similar to laying an engineered plank floor.

3. Its affordable - Usually parquet is way beyond most peoples budgets, but ours range from £57 to £86 per m2 . With installation working out at around £20 per m2

4. Its bespoke - All of our floors are expertly hand finished using Dutch Hard-wax Oils. All of our stock is held unfinished at our factory in Yorkshire. We have over 70 stock shades, but can do bespoke finishes upon request. We can do distressing, wire brushing, band sawing and hand scraping.

5. Its planned out - We take a plan of the proposed floor space and work out how many blocks will be required for the project, meaning no under or over estimations. Clients can see how the floor will look in the living space before they have it. If a client wants a border, we plan it out on a CAD system and cut all the blocks to size.This way everything fits like a jigsaw puzzle when it arrives on-site, making installation simple and leaving little room for error.