Chimiver Varnishing Roller 25 Cm

directions_boat Local

short hair and highly absorbent floor varnishing roller from Chimiver
a fine quality varnishing roller for applying water based floor sealers
it creates a perfect smooth finish without overlapping or streaking
highly appreciated by the professional floor sanding trade & DIY users
it can be used on vertical and horizontal surfaces | reusable many times
it has to be used in conjunction with a varnishing roller frame | support
It fits in most professional varnishing buckets or all large varnishing trays
it works as well with solvent based floor lacquers and water based ones
it can also be used to apply primers and some hardwax oils | refreshers
it enables the user to work faster and drastically reduce product waste
to achieve professional results you need to use quality professional tools

Chimiver Varnishing Roller 25 Cm | Why Use It

Have you ever asked yourself why a professional floor sanding or floor refinishing company can achieve such a perfect smooth finish while using less than half the amount of lacquer used by a DIY user? Because they use top of the range varnishing rollers and also because they know how to do it right to apply enough product but not too much or too little. The new Chimiver Varnishing Roller 25 Cm is your first step in the right direction. Using a varnishing roller with very long hair will splash the lacquer and the surface will look poor when dried. Using a varnishing roller with very short hair will also be problematic if you are not sealing 100% flat surfaces. But the new Chimiver Varnishing Roller 25 Cm is just perfect. It absorbs enough sealer so the user can move on a large floor area without having to refill it, it fits in all gaps, imperfections and uneven surfaces & it can be washed and reused many times over. Why take a chance with a cheap and inefficient varnishing roller when the new Chimiver Varnishing Roller 25 Cm is available to you for much cheaper than expected?

Chimiver Varnishing Roller 25 Cm | Where To Use It

A professional quality varnishing roller like the new Chimiver Varnishing Roller 25 Cm can be used for applying water based floor lacquers, water based floor primers, solvent primers, solvent floor lacquers and a number of hardwax oils & refreshers. The product will impress even the most demanding user and there is little wonder why the floor sanding and the floor refinishing trade cannot get enough of it. It can be used for indoor and outdoor surface varnishing and priming projects. Its innovative design will guarantee the user a streak free finish and a no waste varnish or lacquer application.

Chimiver Varnishing Roller 25 Cm | How To Use It

The new Chimiver Varnishing Roller 25 Cm is sold on its own but to be able to use it you will also need to buy a varnishing roller handle and an extension handle if you are likely to apply the product on a larger surface. A varnishing bucket or a large varnishing tray is also desirable.

Pour the sealer into a bucket or tray.
Place the roller in to it and roll up and down for a few seconds until the varnishing roller has absorbed enough product to look evenly wet.
Apply the roller on the floor and start moving up and down along with the fiber of the wood until the roller fails to create a wet finish. Refill it and move along.
When done with the varnishing roller the user should wash the roller so it can be used on the next project.

Chimiver Varnishing Roller 25 Cm | Recommendations

Use a small varnishing brush to varnish the areas around the edges or all hard to reach areas where the large varnishing roller cannot fit. Do not use the same varnishing roller to apply water based and then solvent based sealers. Do not allow the roller to dry with the sealer on it. If you are likely to re-use it within a few hours, keep it in a plastic bag. Do not attempt to wash a solvent based sealer with clean water. Use white spirit. Use tap water to wash a varnishing roller that was used with a water based sealer.

Chimiver Varnishing Roller 25 Cm

chimiver varnishing brush